Mold
Mold Information
Ten Things You Should Know About Mold
1. Potential health effects and symptoms associated with mold exposures
include allergic reactions, asthma, and other respiratory complaints.
2. There is no practical way to eliminate all mold and mold spores in the
indoor environment; the way to control indoor mold growth is to
control moisture.
3. If mold is a problem in your home or school, you must clean up the mold
and eliminate sources of moisture.
4. Fix the source of the water problem or leak to prevent mold growth.
5. Reduce indoor humidity (to 30-60%) to decrease mold growth by:
a. venting bathrooms, dryers, and other moisture-generating sources to the
outside;
b. using air conditioners and de-humidifiers;
c. increasing ventilation;
d. and using exhaust fans whenever cooking, dishwashing, and cleaning.
6. Clean and dry any damp or wet building materials and furnishings within
24-48 hours to prevent mold growth.
7. Clean mold off hard surfaces with water and detergent, and dry completely.
Absorbent materials such as ceiling tiles, that are moldy, may need to be
replaced.
8. Prevent condensation: Reduce the potential for condensation on cold
surfaces (i.e., windows, piping, exterior walls, roof, or floors) by adding
insulation.
9. In areas where there is a perpetual moisture problem, do not install
carpeting (i.e., by drinking fountains, by classroom sinks, or on concrete
floors with leaks or frequent condensation).
10. Molds can be found almost anywhere; they can grow on virtually any
substance, providing moisture is present. There are molds that can
grow on wood, paper, carpet, and foods.
Ten Things You Should Know About Mold
1. Potential health effects and symptoms associated with mold exposures
include allergic reactions, asthma, and other respiratory complaints.
2. There is no practical way to eliminate all mold and mold spores in the
indoor environment; the way to control indoor mold growth is to
control moisture.
3. If mold is a problem in your home or school, you must clean up the mold
and eliminate sources of moisture.
4. Fix the source of the water problem or leak to prevent mold growth.
5. Reduce indoor humidity (to 30-60%) to decrease mold growth by:
a. venting bathrooms, dryers, and other moisture-generating sources to the
outside;
b. using air conditioners and de-humidifiers;
c. increasing ventilation;
d. and using exhaust fans whenever cooking, dishwashing, and cleaning.
6. Clean and dry any damp or wet building materials and furnishings within
24-48 hours to prevent mold growth.
7. Clean mold off hard surfaces with water and detergent, and dry completely.
Absorbent materials such as ceiling tiles, that are moldy, may need to be
replaced.
8. Prevent condensation: Reduce the potential for condensation on cold
surfaces (i.e., windows, piping, exterior walls, roof, or floors) by adding
insulation.
9. In areas where there is a perpetual moisture problem, do not install
carpeting (i.e., by drinking fountains, by classroom sinks, or on concrete
floors with leaks or frequent condensation).
10. Molds can be found almost anywhere; they can grow on virtually any
substance, providing moisture is present. There are molds that can
grow on wood, paper, carpet, and foods.
 | |  |
© Copyright 2006
Aboveboard
Home Inspection, LLC
Home Inspection, LLC
| - West Hartford, CT 06110 - 860.232.8887 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Aboveboard Home Inspection |
Accurate - Affordable
Award Winning - NACHI Website of the Week - December 2005